- Home
- BLACK FRIDAY 2024 (ENDED)
- La Pavoni Sales
- Coffee Sensor AirBuster® release valve and chamber for La Pavoni Lever group heads
Coffee Sensor AirBuster® release valve and chamber for La Pavoni Lever group heads
From: 150,00 €
- Reviews
- Questions
Thank you for submitting a review!
Your input is very much appreciated. Share it with your friends so they can enjoy it too!
Highly appreciate
I am extremely grateful to Tudor and its team for the great service and quality products and services they offer. I would always turn to CoffeeSensor again.
AIRBUSTER La Pavoni Esperto
L'assemblaggio senza problemi, ma per sigillare le parti ho ustao la colla anaerobica. Un paio di volte non si e' bloccata la valvola e di conseguenza ha buttato l'acqua dal collettore. Spero con il tempo di sfruttare al meglio la sua funzione. Si nota l'aumento di acqua, anche troppa specialmente per l'espresso tradizionale italiano da una tazza. Da consigliare!
Air Buster Valve
In my experience Coffee Sensor consistently develop products that enhance the capabilities of La Pavoni lever machines. Without detracting from the character of the machines they allow users to extract more consistent performance. As advertised, the AirBuster eliminates the unwanted build up of air in the group head as the lever is raised which results in a noticeably less spongy pull when it is lowered. There is also a slight increase in volume of the liquid extracted. The only side effects I have experienced are the occasional discharge of water from the valve’s overflow pipe and a wetter coffee puck after a shot has been pulled caused by water returning down the shaft which holds the valve. I would also caution against attempting to realign the overflow pipe by bending it as shown in the fitting video. Mine detached itself from the valve body. Fortunately it was not hard to dress the end with a file and refit it with a little solder to secure. An unexpected benefit is that the pressure gauge is now much easier to read whilst pulling a shot. All in all, a worthwhile modification delivered speedily and efficiently by Coffee Sensor.
amazing
I am goonna write a public review soon on your website about before and after this update - its really mindblowing its like I have totally new different machine. private feedback for improvement: 1. you can add all tools that are needed for this modification , on some pdf or whatever like: keys size , screws etc. Because I started doing the updated but I didnt have KEY 12 size - so I have to go to the shop - if I knew that I will need this tool I would have bought it before. 2. probably about my mistake to put the FORK the wrong way , I assume you can just add a note that the WAY is important there But overall I had amazing experience building (building is easy for a person with a small experience it took me around 30-40 minutes) it and now using it , very grateful that your company exists and love everything you do , God bless.
More accurate and better pulls
I wondered about how much value this would be, but as I was getting a new sightglass cover kit, I thought it best to combine postage. After fitting a Coffee Sensor PPK a year or so ago, I thought it time to investigate yet more hot-rodding of the EuroPiccolo. In for a penny . . . It allows for a much better and more controllable lever pull, and the lever pressure gauge is in a better position, and more readable. The first two shots I pulled felt instantly better, with no searching for a pressure point in the pull. It's very well machined, constructed and finished. I was slightly worried as to whether the drain pipe would fit past my home-made grouphead heatsink (a modified turbocharger/LED heatsink from AliExpress - sorry!) but with a slight amount of tweaking for clearance it was fine, and the pipe fits just ahead of the RH grouphead mount screw. Another quality product from Coffee Sensor! Well done! (& super-quick postage to the other side of the world: Victoria, Australia) (side note: I think the best thing to hold the T-junction in position whilst fitting the valve and gauge is a pair of Knipex PliersWrench https://www.knipex.com/products/pipe-and-water-pump-pliers/pliers-wrenches-pliers-and-a-wrench-in-a-single-tool/pliers-wrenches-pliers-and-wrench-single-tool/8602180 They're a very useful tool for this sort of work in general, where you want to hold something securely but not mark the polished, painted or plated surface).
Description
Characteristics
Description
Coffee Sensor AirBuster® release valve and chamber for La Pavoni Lever group heads offers the user:
1. Higher yield volume by flushing out the trapped air from inside the chamber and PPK shaft;
2. No spongy start pulls (immediate pressure feedback on the lever arm);
3. No spongy end pull;
4. Safe and fast PF release (no sneeze) right after your extraction;
5. More accurate control for pressure/flow profiling kit;
6. Non electrical and no batteries needed for operating the Air Buster;
7. Fully automatic – no manual opening or closing of the valve needed;
8. Easy installation (addon on our piston pressure kit is easier then ever);
9. Stainless steel parts and brass valve, all food grade materials;
Also, most recent discoveries from Bong are that:
1. You can insert the portafilter in the group head and then IMMEDIATELY lift the lever without worrying that the puck will be raised.
The air from above the puck will be released with the help of the valve instead of the coffee puck suction that usually can happen.
2. No worries of doing fellinis or 2nd pull. Good for those who love the traditional Italian 14g in 60ml out.
Our official installation tutorial is finally here:
The product is created by our special group:
Bong Juachon – Concept idea and design;
Tudor P. from Coffee Sensor – manufacturer / material testing and industrial support;
John Michael Hauck – Tester / Informational, pictures and videos support / CAD support.
Bong J. states clearly, during his volume comparison with and without Air Buster:
The effect of preinfusion / puck saturation was eliminated by simulating a totally saturated puck by mounting a valve that opens at 6bar pressure:
Ave volume with AirBuster® = 43g
Ave volume without AirBuster® = 29.7g
Ave volume % gain = 44.78%
Coffee Sensor AirBuster® release valve and chamber for La Pavoni Lever group heads works only with our original stainless or Gold Brass piston pressure kit.
The height of the AirBuster® is NOT bigger then the height of our original piston pressure kit installed on your machine.
From my dear friend John M. H., we have this great info about Trapped Air & Spongy Pulls we make on La Pavoni Lever machines:
When the piston is in the down position, it prevents water from exiting the group head.
To brew espresso, the portafilter is removed, filled with finely ground roasted coffee beans and re-attached to the group head.
The operator begins the brewing process by raising the piston. This movement has multiple effects.
One, is that the upward movement forces some water above the piston back into the hotter boiler.
Another effect is that rising piston creates a vacuum underneath it which is readily filled with air drawn through the dry porous coffee grounds.
Finally, when the piston reaches the top, a hole is exposed on the side of the cylinder, allowing water to enter the area below the piston.
Ideally what would happen next is that all the air under the piston is driven back through the dry coffee grounds, and the area under the piston is filled with just enough water at the perfect temperature for brewing espresso.
Then, the forceful lowering of the piston drives that water through the ground coffee to extract a perfect espresso.
However, many users of direct lever machines will occasionally experience what is called a “spongy pull”.
That is, as they force the piston down with a lever, they notice the lever springs back up if they let go. This is due to some (compressible) air trapped in the area below the piston.
This is not an ideal situation because not enough water will be available for pulling the shot.
Also, when the portafilter is removed, any remaining compressed air may make a mess of things.
It is important to understand that it is steam, not liquid water, that effectively drives out the air underneath the piston.
When the water enters this area, it undergoes a rapid depressurization.
That is, the pressure of the water in the boiler is higher than the pressure of the air under the piston.
The rapid depressurization results in a small percentage of that water turning to steam, known as “flash steam”. While the percentage of water that turns to steam is small, the volume that steam occupies is large.
To better understand this, we can calculate the volume occupied by water that turns to steam, and the volume occupied by the water that remains liquid.
We can then compare these two volumes as a ratio.
By examining chart, we can see that at 105C, the water entering the area under the group head occupies about 15 parts of steam to 1 part liquid water.
In other words. at 105C, enough steam is generated to fill the area under the group head 15 times over.
At 100C or below, none of the water entering the area under the piston turns to steam.
This then is the reason why introducing cooler water into the area under the piston results in spongy pulls.
The remedy of course is to increase the water temperature by, for example, maintaining a higher group head temperature.
However, brewing espresso benefits from water at a temperature in the range of 91-96C to keep it from over-extracting the coffee, which yields a bitter taste.
This intricate knife-edged trade-off of these types of lever machines makes them endearing to many.
With this understanding then, it should be easier to understand the thinking behind the “air buster”.
Kit content:
1. AirBuster® release valve (brass);
2. AirBuster® chamber for release valve, including the water collector + water cap + gasket for the inside of the cap;
All are made from polished Stainless Steel.
3. One Teflon washer;
4. Teflon tape for sealing purposes;
5. One Left (L) or Right (R) pressure gauge;
6. T shaped connector for shaft + gauge + release valve triple connection;
Characteristics
Weight | 500 g |
---|---|
WITH PPK | STAINLESS PPK INCLUDED, GOLD PPK INCLUDED, NO PPK |
GAUGE SIDE | LEFT, RIGHT |
BUSTER BODY COLOR | STAINLESS, GOLD |