Coffee Sensor White E61 group pressure gauge M6 thread fits most E61 coffee machines on the market, like Rocket, ECM, Bezzera, Expobar and so on.
Possible not to fit special Vibiemme or Wega group heads. Reason is the special insertion angle that these manufacturers decided to make in order to drill inside the GH.
Comes with our Coffee Sensor text logo printed on the mask.
We offer this gauge with:
1. 2 copper washers;
2. Teflon tape,
in order to install it on your machine.
This is the exact same gauge we use with our custom made flow control device – click to view.
You can use it to easily retro fit your coffee machine with the best quality gauge, so you can monitor the pressure extraction from inside your GH.
Depending on the readings, you could find some possible errors on your coffee puck, like bad tamping, bad grind size setup and so on.
The ideal extraction is around 9 bar and pre infusion at max 2.5 bar.
Tech specs:
Mask colour: White;
Thread: M6;
Front mask diameter: 40mm;
Material: chrome front case and stainless steel back stem;
Measurements: 0-16 bar.
Installation steps:
– With unplugged for socket and cold machine, remove hex nut in front of the E61 gh;
– Leave original teflon gasket inside the GH;
– Use some Teflon tape to seal the gauge thread; wrap tape always clock wise on the thread;
– Test for leaks using a blind basket.
And you’re done !