La Pavoni Lever wood handles and knobs custom made kit includes:
A) 1 Walnut Hardwood Boiler Cap with a brand new VITON gasket;
B) 1 Walnut Hardwood Steam Knob with a new type of pin insertion inside, for safe and fast removal for future servicing the steam tap;
C) 2 Walnut Hardwood Lever and Portafilter Handles with M12 thread.
The wood parts are HANDMADE by an enthusiast and not on automatic wood CNC machines.
The metal used as core for the big knob is pure Stainless and brass for the small knob.
Some small dents or different signs on the products are possible to exist due to the NON industrial / NON automatic processes done for creating these products.
We currently have only M12 lever and PF handles.
Our La Pavoni Lever wood handles and knobs custom made kit helps you rebuild any La Pavoni Europiccola, Professionale or Stradivari model lever machines.
As this is a natural wood product kit, the grain may vary slightly from photo shown.
Also there could be a grain difference from one piece of the kit to another.
Do not force the big knob / small knob during usage.
Regarding the big knob, the VITON gasket will take care of the seal.
It is NOT needed to close the knob with high force after water refill or removal in or from the boiler.
The usage of too much force will 100% shorten both knobs life.
Regarding the small knob, it’s very important to insert the installation pin so that it makes contact with both brass and wood parts.
That will ensure 100% good contact with the steam metal shaft hole.
A good seal inside the steam system is ensured by the inside rubber washer.
If you feel you need to close the knob with too much force, it could be a sign that the steam wand needs a servicing.
We are not responsible for broken wood parts due to not reading and understanding the above information.
As wood is a natural material, accept the fact that there could be a color difference from part to part.