Olympia Cremina 67 and New Model full Service Gasket Set

Great Kit but you need some more stuff

The gaskets are great, especially the piston gaskets. For the older 67 model you will need 2 brass, teflon or thick gasket paper gaskets for 1/4 npt with outer diameter 18mm inner diameter 13mm (13.2). Additionally for the steam wand connection you will need a 13x3 or 13x2.5 ORing as that seals the front plate onto the boiler part. The sight glass orings in this kit are great but you should tighten it a lot until there is zero movement on the sight glass as otherwise it will leak and you will have to tighten it afterwards with the boiler attached which is a pain that i had to endure. When ordering this kit i recommend ordering some spare piston gaskets as they are quite cheap but will probably the part you will have to replace the soonest. All the gaskets fit very nice and snug, the only thing I wish was a cap for the piston shaft to enter the grouphead easily, the small gasket in the grouphead makes it quite hard to put the piston in the first time. And I also wish the missing 13mm oring and the 1/4 npt teflon washers were included. Thanks a lot for the gaskets. I will for sure shop with you again ;)