Olympia Stainless Boiler Cap adapter with Gauge Included for pressure reading

Olympia Stainless Boiler Cap adapter with Gauge Included for pressure reading.

Two gauge models available for selection: white background and naked model.

Gauge shows max 2.5 bar, allowing on the old 67 machines to set up the boiler working pressure WITHOUT making holes on the front mask or any other adaptation.

The adapter can fit Cremina and Maximatic lever machines.

Adapter has 4 cut key shapes (two sides where you can use a key to open or close) on it, for easier installation or removal.

Mirror polish on the material, for best looks possible.

Includes our brand new rubber boiler cap seal.

In order to use this at top performance and looks, you will need to assemble it on your machine.

Olympia Boiler Cap adapter with Gauge Included comes Teflon tape in the kit, for the gauge installation process.

First, install the boiler cap adapter on the machine and only then go to the gauge installation second step.

In order to have the gauge facing perfectly towards you, use thread locker (not supplied) or around 4-5 Teflon tape (included) wraps and screw the gauge almost to the last thread line and leave it facing you.

The tape or thread locker should take care of the seal, even if the gauge is not screw all the way inside the adapter.

ATTENTION !!!

Never play with safety !!!

This kit is good for the old 67 models and fits also the new models BUT REMEMBER, all new gen Cremina’s have the safety valve INSIDE or INCORPORATED in the boiler knob.

Also, I created this knob just for testing or setting up the pressure stat purposes.

It was never meant to be used daily, unless the user wants this, but remember, NEVER REMOVE IT with a machine under pressure.

Also, the knob will surely get hot, after or during machine use.

You can get burned when you would want to remove this from a hot machine.