- Home
- E61 Group Head
- Gaskets and washers
- E61 Orange Silicone Filter Holder Gasket 73x57x8 mm
E61 Orange Silicone Filter Holder Gasket 73x57x8 mm
7,00 €
- Reviews
- Questions
Thank you for submitting a review!
Your input is very much appreciated. Share it with your friends so they can enjoy it too!
Goood!
Better fit for Gaggia Classic Pro than the original one, portafilter slides easier, more flexible.
Silikon Filter Gasket for E61
Very good quality, perfect support. It fits very tight into the ECM Mechanica Slim, so it should be thin lubricated with silicon.
Description
Characteristics
Description
E61 Yellow Silicone Filter Holder Gasket 73x57x8 mm has an advanced design and best material, much better than the classical black rubber ones.
Our gasket is produced from heat-resistant silicone, has a very soft consistency for an easier installation on the group, has longer durability, offers better sealing and excellent
visibility to check it’s warn level, thanks to its light color.
Also, our E61 Yellow Silicone Filter Holder Gasket 73x57x8 mm is made of the best soft silicone that does not have any smell and that also does not becomes rock solid after little use.
Because if this special characteristics, changing process, when needed, is fast and easy. Plus this gasket has special internal grooves.
Suitable for all E61 style groupheads from:
- Azkoyen
- Bezzera
- Bianchi
- ECM
- Expobar
- Faema
- Faimac
- Fiorenzato CS
- Fracino
- Futura
- Futurmat
- Gaggia
- Grimac
- Isomac
- Italcrem
- Lavazza
- Izzo MyWay
- Quick Mill
- Reneka
- Rocket
- Sanremo
- Scala
- VFA
- Vibiemme
- Visacrem.
The list can be much longer, so does not stop only at these models of coffee machines manufacturers.
DISCLAIMER
All the gaskets sold on my website are tested personally on the exact machine it’s sold for.
So, I know for sure they are good and do work and are 100% compatible.
No gasket is custom made or resold BEFORE I do a personal test on my machines.
Before doing an installation, contact me directly if you feel you need guidance or info / details regarding the installation process.
Never contact me AFTER the damage is done saying that the gasket / gaskets were bad and demanding new gaskets or a refund.
Gaskets DO NOT DAMAGE by themselves and do not get cut just sitting around on the working bench, if you know what I mean.
A manufacturing fault of the gasket MUST BE DECLARED right upon receiving the product by you. Later on complaints will not be taken into consideration. I had customers claiming warranty after 1 year of purchase.
We had situations when a customer destroyed four identical gaskets and said they are bad.
After that, I sent a video with proof that it worked for me during my first try, at cold, with no preps or training before doing the video.
Even so I have sent the customer new gaskets to help out, and guess what, it seems the new ones were also bad 🙂
Take into consideration that sometimes, the tolerances during manufacturing process of the machines are what they are and even a 0.2mm deviation can make your life hard during installation.
IMHO, Coffee Sensor is not always to be blamed for small problems with the compatibility of the gaskets with some machines.
Always use grease to install any gasket from our website.
That helps them slide into position and should never get the product shredded or destroyed / pinched in any way.
Never use sharp edges like cutters, screw drivers or anything similar to help slide the gaskets into place.
That could cut the gasket and make it unusable.
I do not accept warranty claims due to bad manipulation / handling of the gaskets.
Purchase the gaskets only if you understood and read these instructions and disclaimer and accepted these terms and conditions.
Characteristics
Weight | 16,3 g |
---|