La Pavoni Lever Gold Brass support leg or connector for installing thermometers or sensors

La Pavoni Lever Gold Brass support leg or connector for installing thermometers or sensors is used for the installation of a thermometer or sensor near the group head of LP coffee machines or any other machine that has a bolt or screw and let’s use use it in order to install the product.

The gold brass LP connector can be used on both sides of the group head by removing one of the bolts and installing the support between it and the group head body.

Exterior real size is: 57.2 x 36.1 mm.

Interior real size is: 47.4 x 26.4 mm.

The foot is 33.8 mm long and has a circle of 6 mm diameter, where the bolt comes.

The width of the brass plate is 0.8 mm.

The material used is brass with mirror effect polish.

We ship just the metal connector and NOT the thermometer also.

Sensor needs to be purchased separately.

Disclaimer – Pure Brass Parts and Natural Patina

Our pure brass polished parts are made from untreated, genuine brass.

Over time, brass will naturally develop spots of oxidation and a so called patina. This is a normal and expected process, characteristic of authentic brass, and not a defect.

We intentionally do not apply coatings or platings to our brass parts. While coatings may initially prevent oxidation, they tend to develop visual defects over time that are more difficult to correct. In contrast, natural brass can easily be restored through simple manual polishing, allowing the part to regain its original shine whenever desired.

By purchasing brass parts from our store, you acknowledge and accept that:

• Natural oxidation and patina will occur with use and time.

• This change in appearance is part of the charm of genuine brass.

• Maintenance through occasional polishing is both possible and recommended.

If you prefer parts that do not change in appearance, please note that pure brass may not be suitable for your expectations.