You are here:
Product code: 00000023
La Pavoni or E61 coffee machine universal thermometer with wire and diode
From: 9,00 €
New 2023 improved design of one of the best selling products we currently have.
Now we ship this sensor with custom made shorter wire and two special thermal resistant sticky pads.
This way we got rid of the nasty too long black wire that standard sensors had.
Stainless or brass leg connector are available BUT NOT INCLUDED IN THE PRICE.
Connector needs to be purchased separately.
Customer Reviews
4.6 Based on 14 Reviews
Customer Photos
Filter Reviews:
PT
08/11/2024
Piotr T.
PLuniversal thermometer
great - real
PT
13/10/2024
Peter T.
NZºc
Easy to install, constant readings
MC
19/09/2024
Marco C.
DEA must!
Most fundamental upgrade for having a consistent machine!
DS
06/05/2024
David S.
SIGreat cheap upgrade but exposed wires need to be isolated (used heat shrink tubes)
It works well when attached slightly to the back but one of the connectors snapped even though it wasn't bent much. Also, when I first installed it i.e. sticked it to the group using provided metal tape strip it kind of shorted and was showing weird characters on the display. Only then I inserted a piece of plastic foil between the metal tape and both wires then it started working. However, when one of the wires snapped I did some DIY improvements and resoldered both connectors with heat shrink tubes on them so they are isolated from each other where wires were exposed thus avoid shorts. It's now working perfectly and shown temperatures finally reflect what's on the factory LP group temperature strip. The arm is a bit expensive for what it is but it's well worth the upgrade as apparently the temp strips stop working correctly after some time passes.
DS
06/05/2024
David S.
SIGreat cheap upgrade but exposed wires need to be isolated (used heat shrink tubes)
It works well when attached slightly to the back but one of the connectors snapped even though it wasn't bent much. Also, when I first installed it i.e. sticked it to the group using provided metal tape strip it kind of shorted and was showing weird characters on the display. Only then I inserted a piece of plastic foil between the metal tape and both wires then it started working. However, when one of the wires snapped I did some DIY improvements and resoldered both connectors with heat shrink tubes on them so they are isolated from each other where wires were exposed thus avoid shorts. It's now working perfectly and shown temperatures finally reflect what's on the factory LP group temperature strip. The arm is a bit expensive for what it is but it's well worth the upgrade as apparently the temp strips stop working correctly after some time pass .
08/10/2024
Coffee Sensor
Hi. We just received the new model of the sensor. Please contact us for a replacement.
Description
Characteristics
Description
La Pavoni or E61 coffee machine universal thermometer with wire and diode.
Is used to measure group head temperature, or other hot parts, like boiler.
Special leg connector can be bought here: https://coffee-sensor.com/product/la-pavoni-stainless-steel-support-leg-or-connector-for-installing-thermometers-or-sensors/
Already shipped with two thermal resistant sticky pads so that the wire is glued to the desired to be monitored part of the coffee machine.
The stainless or brass leg connector / bracket is NOT included in the price (seen on the left of the pic, where the sensor’s body is inserted).
La Pavoni or E61 coffee machine universal thermometer with wire and diode back dimensions are: 44.7 x 25.6 mm.
The front mask is: 28.5 x 47.57 mm.
Wire length: around 10 cm.
Case material: ABS.
The thermometer can show ONLY Celsius units.
The sensor is always ON, so it does not have an ON/OFF button.
The latency is aprox. 1.5 seconds between readings.
Characteristics
| Weight | 30,4 g |
|---|---|
| LEG CONNECTOR | WITHOUT, SILVER, GOLD |
MOLYKOTE 111 COMPOUND GREASE PACKET - 6g
9,00 €
La Pavoni Lever Short Double Spout with 3/8 thread (chrome and gold)
From: 5,50 €
Niche compatible tamp through tall funnel for E61 58mm
28,00 €
Coffee Sensor Espresso Coffee Stirrer or WDT tool
15,00 €
Coffee Sensor White E61 group pressure gauge M6 thread
25,00 €
Coffee Sensor Black E61 group pressure gauge M6 thread
25,00 €
Universal Double Spout with 3/8 thread
6,00 €
E61 Yellow Silicone Filter Holder Gasket 73x57x8.5 mm
6,60 €
