La Pavoni Lever unique and custom handmade wood kits

La Pavoni Lever unique and custom handmade wood kits:

A) 1 Hardwood Boiler Cap with a brand new silicone gasket and metal core;
B) 1 Hardwood Steam Knob with metal insert that uses a metal pin for fixing into position, for safe and fast removal for future servicing of the steam tap;
C) 2 units of Hardwood Lever and Portafilter Handles, one equipped with an M12 metal thread (to be used on the portafilter body).

The wood parts are UNIQUE and HANDMADE by an enthusiast and not on automatic wood CNC machines.

The oil used on the parts is a special one MADE IN UK. We do not use varnish or other covering materials on the wood kits.

The metal used as core for the big knob is pure Stainless and brass for the small steam wand knob.

We currently have only M12 thread lever and PF handles.

Pay attention that we constantly update the type of wood available.

La Pavoni Lever unique and custom handmade wood kits helps you rebuild any La Pavoni Europiccola, Professionale or Stradivari model lever machines and also enhance the looks of any lever machine !

ATTENTION !

As this is a natural wood product kit, the grain may vary from photo shown on the product page.
Also there could be a grain difference from one piece of the kit to another.

Do not force the big knob / small steam wand knob during usage. The seal should be done by the gaskets and not by the pushind force !
Regarding the big knob, the silicone gasket will take care of the seal.
It is NOT needed to close the knob with high force after water refill or removal in or from the boiler.
The usage of too much force will 100% shorten both knobs life.

We are not responsible for broken wood parts due to not reading and understanding the above information and usage terms.

Never wash into machine with chemicals.
Use clean dry cloth only !