LP-011 La Pavoni stainless steel support leg or connector for installing thermometers or sensors
10,00 €
The stainless steel LP connector can be used on both sides of the group head by removing one of the bolts and installing the support between it and the group head body.
CAAwesome , make the readout well place and very neat
SEDoes its job very well, putting the thermometer in place was a bit tricky and I managed to bend the connector a little, but it's hardly noticeable in daily use.
FRNice to hold the CS-014 thermometer. Would be even better it it was slightly tilted to ease the reading
very useful!!
This special product is used for the installation of a thermometer or sensor near the group head of LP coffee machines or any other machine that has a bolt or screw and let’s use use it in order to install the product.
The stainless steel LP connector can be used on both sides of the group head by removing one of the bolts and installing the support between it and the group head body.
Exterior real size is: 57.2 x 36.1 mm.
Interior real size is: 47.4 x 26.4 mm.
The foot is 33.8 mm long and has a circle of 6 mm diameter, where the bolt comes.
The width of the SS plate is 0.8 mm.
The material used is 304 food grade Stainless Steel.
| Weight | 6.3 g |
|---|
Related products
La Pavoni
LP-004 Coffee Sensor Complete set Pressure Gauge and adapter for La Pavoni Europiccola SS304
